Bore Tech’s Proof-Positive Nylon Bore Brushes eliminate
the false indication of copper fouling found with traditional bronze brushes
and copper removing cleaners. With twice the amount of oversized bristles,
double wound cores, looped ends and barrel safe studs these brushes are
exceptionally ridged and provide safe and effective scrubbing action all while
setting the standard for nylon brushes.
Bore Tech’s Proof-Positive Nylon Bore Brushes are
100% barrel safe and set the benchmark for all other nylon brushes. This is due
to the superior construction and engineered features that are incorporated into
each and every brush.
Unlike phosphor bronze bristled brushes, our premium
Proof-Positive Nylon Bore Brushes are strongly recommend when using fast acting
copper removing cleaners such as our Eliminator Bore Cleaner or Cu+2 Copper
Remover. This is due to the fact that traditional phosphor bronze brushes
contain over 90% copper in their composition and will turn patches blue when in
contact with most copper removing cleaners. With barrel safe, non-brass cores
and threads Bore Tech’s Proof-Positive Nylon Bore Brushes are not affected by
copper removing cleaners and will eliminate blue patches and the false
indication of copper fouling that is associated with traditional phosphor bronze
brushes.
TRADITIONAL BRASS PRODUCTS
PROOF-POSITIVE PRODUCTS
All Proof-Positive Nylon Bore Brushes have twice the amount
of extra ridged nylon bristles and each caliber has specifically tailored
bristle diameters resulting in double the scrubbing action and faster cleaning.
Each non brass, double wound brush core has a looped end
eliminating the sharp cut ends found on many other low quality brushes. This
attention to detail along with aircraft grade aluminum studs are all necessary
to produce an effective, long lasting, high quality nylon bore brush for your
pistol.
Bore Tech’s Proof-Positive Nylon Pistol Bore Brushes are
available in Single Packs and Three Packs ranging from .22 to .45 caliber.
Eliminate the confusion and be 100% Proof-Positive that your
pistol barrels are free of copper fouling.
Bore Tech - Redefining Gun Care
Proudly made in the USA
Proof-Positive Nylon Pistol Bore Brushes
|
Pistol Brushes
|
.22
Cal - .50 Cal
|
|
Brush
Threads
|
Male
8/32
|
|
Brush
Length
|
1 ½
inches
|
|
Core
|
Looped
End, Double Wound Alloy
|
|
Stud
|
Aircraft
Grade Aluminum
|
Proof-Positive Nylon Pistol Bore Brushes Use Instructions
1. Screw brush onto Rod
2. Wet brush with cleaning solvent
3. Make 6-12 passes down length of barrel
4. Reapply cleaning solvent and continue to brush as
necessary
5. When finished, clean brushes before storage.
FAQ
Q: What do I clean my brushes with after use?
A: When using Bore Tech Cleaners, simply use warm water. We
recommend rubbing the brushes between your palms while warm tap water flows
over them.
Q: Why do my patches always turn blue when using your
brushes with Eliminator Bore Cleaner?
A: Eliminator or any other cleaner that is designed to
remove copper fouling will attack all bronze brushes and remove the copper
within the bristles. To avoid this false indication of copper fouling in the
bore, we recommend using our Proof-Positive Nylon Brushes with all copper
removing cleaners.
Q: Do I have to unscrew my brushes before pulling my rod
back through the bore to prevent damage to the crown?
A: We have been cleaning barrels since 1997 and have never
had a crown compromised or accuracy affected by pulling a brush back through
the bore. With our properly designed brushes and when used in a proper manner
our brushes are 100% barrel safe. All of our barrels have been “shot out” well
before a brush could have caused any damage.
Q: Will the core of the brush harm my barrel?
A: With our properly designed brushes and when used in a
proper manner our brushes are 100% barrel safe.
Q: What thread sizes are your brushes and are they male
or female ended?
A: All Bore Tech brushes are male ended and have the thread
pitch listed under the Specifications Tab on the respective product page.
