Bore Tech is proud to introduce the patent pending AR
Complete Receiver Cleaning Kits. They are the industry’s most innovative and
comprehensive kits specifically engineered for precision cleaning of AR upper
and lower receivers. Featuring professional grade tools, these kits simply and
effectively reduce cleaning time and provide a spotless upper & lower
receiver. Available for both the AR-15 and AR-10 platforms.
ARs are notorious for collecting brass shavings, powder
residue, debris, oil, grease, and solvents in the barrel extension, upper &
lower receiver, and trigger group. This
accumulation of debris can cause operational malfunctions and increase wear on
your bolt, bolt carrier, trigger group, and receiver. In the past, these areas
have been difficult or impossible to properly clean. Not anymore! The AR
Complete Receiver Cleaning Kits were designed to provide all the necessary,
best performing, professional grade tools in a single convenient easy to use
kit.
The unique AR Receiver Cleaning Kitcenters around the
exclusive, patent pending cross shaped Barrel Extension Wiper, circular shaped
Upper Receiver Wiper and the multipurpose Bolt and Carrier Cleaning Tool.
The cross shaped Barrel Extension Wiper eliminates clumsy
dental rolls and ineffective felts that fall off, barely clean, and pack full
of fouling rending them useless. With Bore Tech’s Barrel Extension Wiper,
simply spike a patch over the wiper and observe how the flexible rubber fingers
compress as they pass through the locking lugs and spring open once inside the
barrel extension providing a thorough and complete cleaning.
The same principle is utilized with the circular shaped
Upper Receiver Wiper. Spike a patch over the wiper and watch how it perfectly
conforms to the receiver walls for a thorough and complete cleaning every time.
The multipurpose Bolt and Carrier Cleaning Tool can handle
everything from extreme fouling to light cleanings. The frontend of the tool
focuses on the stubborn carbon buildup inside of the carrier while the backend
focuses on the carbon buildup found on the bolt tail. Two professional cleaning
tools in one easy to use, ergonomic handle.
Use the frontend of the Bolt and Carrier Cleaning Tool to
loosen the bulk carbon with the 100% safe Carrier Scraper. Then loop the provided green cleaning pads
through the tool and use them inside the carrier to perfectly clean away any
remaining carbon. Dry the carrier following the same steps with the provided
patches. The tool also features an incorporated firing pin scraper for removing
the fouling under the firing pin retaining ring.
The same detailed cleaning technique is applied to the
backend of the Bolt and Carrier Cleaning Tool.
The integrated, 100% safe bolt tail scraper easily removes stubborn
carbon fouling. Then follow with the provided green cleaning pads for a perfect
cleaning. Finally dry with patches in the same fashion and you are done. It is
that easy!
The 14 Piece Kit cleans:
- Patent
Pending Molded Rubber Wipers Rapidly Clean/Dry Barrel Extension &
Upper Using Included Patches
- Exclusive
Combination Bolt and Carrier Tool Easily Scrapes, Cleans, and Dries Bolt
& Bolt Carrier Using Included Green Cleaning Pads & Patches
- Reinforced
Polymer Cleaning Pick Safely Cleans Hard To Reach Areas such as the
Charging Handle Recess and Trigger Group
- Polymer
Rod Guide Effectively Stabilizes The 9” Non-Rotating Rod & Prevents
Rod From Contacting Upper
- Proof-Positive®
Brushes & Loop Quickly Loosen & Clean Stubborn Fouling in the
Chamber and Upper
Available for both .223/5.56mm AR-15 & .308/7.62mm AR-10
Platforms
Choose the best… Choose the Bore Tech AR
Complete Receiver Cleaning Kit
Bore Tech - Redefining Gun Care
Proudly made in the USA
AR Complete Receiver Cleaning Kit
Packaging: Clear Plastic Case w/ Foam Cut Out
Dimensions: 27.5” x 1.75” x 1.75”
Includes:
|
Polished Stainless Steel Rod
|
Molded
Rubber Barrel Extension Wiper
|
|
Polymer
Rod Collar
|
Molded
Rubber Upper Receiver Wiper
|
|
Bolt
Carrier Cleaning Tool
|
Proof-Positive
Chamber Brush
|
|
Bolt
Tail Cleaning Tool
|
Proof-Positive
Upper Brush
|
|
Polymer
Cleaning Pick
|
Proof-Positive
Chamber Loop
|
|
X Count
Cotton Patches
|
Cotton
Cleaning Swabs
|
|
Green
CLeaning Pads
|
Double
Ended Nylon Gun Brush
|
Rod Length: 9”
Rod Diameter: 0.250”
Rod Thread Pitch: 8/32 Female Threads;
Recommended For Use with: Bore Tech C4 Carbon Remover (Not Included)
FAQ
Q: Will harsh chemicals harm the rubber wipers?
A: No, the rubber compound used for molding the wipers is
extremely chemically resistant. However, we still recommend cleaning the wipers
after use with water.
Q: What is the recommended patch size for my AR?
A: 2½” Round Bore Tech X-Count Patches for the AR-15 2¾”
Round Bore Tech X-Count Patches for the AR-10
[ITEMPRICE]