The HandALL Stick Kit helps keep your HandAll in place and
prevents slippage from heavy use.
The Stick Kit contains approximately 48 inches of
specialized double sided tape and firearm friendly solvent for several
applications. This is the same system that is used by Golf pro shops to keep
club sleeves in place.
1.) Before starting work, make sure the gun is unloaded and
made safe with magazine removed.
2.) Remove any oily residue from grip area to assure
3.) After checking where HandAll will be located on the
firearm, apply grip tape continuously to firearm handle area, stopping
approximately 1/8” short of edges of HandAll.
4.) Spray a small amount of tape activator onto the handle
of the firearm and inside of the HandAll Grip Sleeve.
5.) Install HandAll by sliding it onto the firearm and
maneuvering it into place were it is comfortable for hand placement.
6.) Wipe excess solvent off with dry cloth. If necessary
trim any exposed tape, being careful not to cut into or scratch firearm.
7.) Allow 24 hours to dry before using firearm.