Bore Tech’s innovative Proof-Positive Pistol Patch Jags
eliminate the false indication of copper fouling that is common with all
traditional brass jags when using copper removing cleaners. Constructed from a
proprietary alloy and engineered to provide superior cleaning, these jags set
the standard for effective, non-brass, 100% barrel safe jags. Are your barrels
PROOF-POSITIVE clean?
Bore Tech’s innovative Proof-Positive Pistol Patch Jags
eliminate the annoying false indication of copper fouling that is common with
all traditional brass jags when using copper removing cleaners.
All Proof-Positive Pistol Patch Jags feature a proprietary
alloy and secondary treatment process, making them 100% brass free and 100%
barrel safe. This alloy is as soft as brass but boasts an exceptional tensile
strength to prevent bending and snapping under the force of a tight patch.
Traditional brass patch jags are over 60% copper in their
composition. When using effective copper removing cleaners this results in a
blue copper fouling color on your patches when no copper is present in the
bore. By eliminating brass accessories, shooters can effectively determine when
a rifle bore is truly copper free and reduce wasted patches, chemical and time.
TRADITIONAL BRASS PRODUCTS
PROOF-POSITIVE PRODUCTS
Each Proof-Positive Pistol Patch Jag is precision machined
to strict tolerances in order to work flawlessly and provide true, concentric
pressure on the barrel surface.
Our Proof-Positive Pistol Patch Jags prevent damage to the
firearm’s crown when pulling the rod back into the bore by utilizing a
completely smooth, edge free transition between the jag and rod when used with
either our Proof-Positive Bore Stix or V-Stix cleaning rods.
Finally an answer to your question, “Is my barrel clean”?
Yes, it is PROOF-POSTIVE clean!
Bore Tech - Redefining Gun Care
Proudly made in the USA
FAQ
Q: Why are my patches so tight and getting jammed in the
bore?
A: There are many factors that can lead to this issue.
Presuming that you are using the correct caliber jag and patch size for your
application (Please consult our Patch Selection Chart) there is a simple trick
to avoid this issue. A commonly overlooked solution to remedy overly tight or
jammed patches is what we call “Side Spiking”. Please see our Side Spiking
article located in the Knowledge Center for detailed information.
Q: Should I use an undersized jag?
A: We typically do not recommend using undersized jags. We
have designed and tested our jags to ensure they work properly in their
respective calibers when using the correct size Bore Tech X-Count patches.
Q: What do I clean my jags with after use?
A: When using Bore Tech Cleaners, simply use warm water. We
recommend rubbing the jags between your palms while warm tap water flows over
them.
Q: What thread sizes are your jags and are they male or
female ended?
A: All Bore Tech jags are male ended and have the thread
pitch listed under the Specifications Tab on the respective product page.
Q: Why do my patches always turn blue when using Eliminator
Bore Cleaner?
A: Eliminator or any other cleaner that is designed to
remove copper fouling will attack all brass jags and remove the copper within
the jag. To avoid this false indication of copper fouling in the bore, we
recommend using our Proof-Positive Jags with all copper removing cleaners.
Q: Do I have to unscrew my jag before pulling my rod back
through the bore to prevent damage?
A: A crown is not compromised nor accuracy affected by pulling
a properly designed jag back through the bore. We take great care during our
design process to make sure our jags have a flush, edge free transition when
used in conjunction with the correct Bore Tech cleaning rod. Again, when used
with the correct rod and in a proper manner our jags are 100% barrel safe.
Q: Are the Proof-Positive jags barrel safe?
A: All Proof-Positive Patch Jags feature a proprietary alloy
that is as soft as brass and100% barrel safe.
[ITEMPRICE]