Bore Tech’s Proof-Positive Nylon Bore Brushes are 100% barrel safe and set the benchmark for all other nylon brushes. This is due to the superior construction and engineered features that are incorporated into each and every brush.
Unlike phosphor bronze bristled brushes, our premium Proof-Positive Nylon Bore Brushes are strongly recommend when using fast acting copper removing cleaners such as our Eliminator Bore Cleaner or Cu+2 Copper Remover. This is due to the fact that traditional phosphor bronze brushes contain over 90% copper in their composition and will turn patches blue when in contact with most copper removing cleaners. With barrel safe, non-brass cores and threads Bore Tech’s Proof-Positive Nylon Bore Brushes are not affected by copper removing cleaners and will eliminate blue patches and the false indication of copper fouling that is associated with traditional phosphor bronze brushes.
TRADITIONAL BRASS PRODUCTS PROOF-POSITIVE PRODUCTS
All Proof-Positive Nylon Bore Brushes have twice the amount of extra ridged nylon bristles and each caliber has specifically tailored bristle diameters resulting in double the scrubbing action and faster cleaning.
Each non brass, double wound brush core has a looped end eliminating the sharp cut ends found on many other low quality brushes. This attention to detail along with aircraft grade aluminum studs are all necessary to produce an effective, long lasting, high quality nylon bore brush for your rifle.
The .17 and .20 caliber rifle brushes are shortened 1 inch in length to lessen the necessary force required to push a brush through the bore. This helps diminish cleaning rod flex that can result in cleaning rod and barrel damage.
Bore Tech’s Proof-Positive Nylon Rifle Bore Brushes are available in Single Packs and Three Packs ranging from .17 to .50 caliber.
Eliminate the confusion and be 100% Proof-Positive that your rifle barrels are free of copper fouling.
Bore Tech - Redefining Gun Care
Proudly made in the USA
Proof-Positive Nylon Rifle Bore Brushes
|Rifle Brushes||.17 & .20 Cal||.22 Cal - .50 Cal|
|Brush Threads||Male 5/40||Male 8/32|
|Brush Length||1 ½ inches||2 ½ inches|
|Core||Looped End, Double Wound Alloy||Looped End, Double Wound Alloy|
|Stud||Aircraft Grade Aluminum||Aircraft Grade Aluminum|
Proof-Positive Nylon Rifle Bore Brushes Use Instructions
1. Screw brush onto Rod
2. Wet brush with cleaning solvent
3. Make 6-12 passes down length of barrel
4. Reapply cleaning solvent and continue to brush as necessary
5. When finished, clean brushes before storage.