Bore Tech Friction Guard XP Gun Oil is a highly advanced
synthetic blend of oils, penetrants and friction reducing additives combined with
enhanced rust and corrosion inhibitors. Friction Guard XP offers unsurpassed
lubrication, unequaled performance and complete metal conditioning under the
most extreme conditions.
Bore Tech Friction Guard XP Gun Oil is a specially
formulated synthetic blend of oils with cutting edge additives that provide
high performance lubrication and enhanced rust and corrosion properties that
exceed MIL-PRF-63460E requirements.
Friction Guard XP’s technologically advanced formulation
incorporates proprietary additives that penetrate deep into the metal’s pores
and bond to the metal’s surface creating an enhanced film strength layer that
provides superior anti-wear properties over a wide range of operating
temperatures. Friction Guard XP will not burn off under extreme temperatures
found during full auto fire or become sticky and gummy in the extreme cold with
a -100°F to 600°F operating range.
The Friction Guard XP also offers unparalleled protection
against rust and corrosion by forming an effective barrier film on the surface.
This micro thin film has surpassed 100 hours in the ASTM B-117 salt spray test
and proven to effectively displace moisture and neutralize corrosive residues.
A light coat of Friction Guard XP during storage continues
to condition the metal surface. It will not attract dust or debris and helps
repel fouling during shooting.
Bore Tech’s Friction Guard XP is the enhanced oil of choice
for the extreme shooter, hunter or enthusiast looking for nothing but the best.
Bore Tech - Redefining Gun Care
Proudly made in the USA
Bore Tech Friction Guard XP Gun Oil Use Instructions
UNLOAD FIREARM
1) Clean areas to be treated with Bore Tech Blast Degreaser
and let dry.
2) Next, apply Friction Guard XP to all moving parts. Cycle
the parts several times to distribute oil evenly.
3) If applying to bore, wet a Bore Tech patch/mop and pass
through bore until a light coat of oil is present.
4) Before using firearm, always run a dry patch through the
bore. This will remove any residue and ensure against obstructions.
FAQ
Q: When do I use the Friction Guard XP Gun Oil instead of
Shield XP Rust Preventative?
A: Friction Guard XP is recommended for use internally
(rifle bores) to protect against rust and corrosion or as a lubricant on moving
parts. The Shield XP is recommended for use on the exterior of firearms to
protect against rust and corrosion and is not a lubricant. Please see our
convenient and easy to use Lubricant/Preventative Selection Guide in the
Specifications Tab or in the Knowledge Center.
Q: Can I use Friction Guard XP inside my bore?
A: Yes, the Friction Guard XP can be used inside your bore to
protect against rust and corrosion for extended periods.
