Bore Tech Eliminator™ Bore Cleaner is the premier, state of
the art bore cleaner that has taken the shooting industry by storm. The
revolutionary and patented formula is 100% barrel safe, biodegradable and
easily outperforms the competition. Eliminator rapidly removes carbon and
copper fouling without the safety hazards, harmful toxicity, and unpleasant
odors found in competitive cleaners.
Bore Tech Eliminator™ Bore Cleaner is the patented,
fast-acting, barrel safe, non-ammonia bore cleaner that has taken the shooting
industry by storm. Eliminator has been proven to surpass the rigorous demands
of the modern day shooter and is the cleaner of choice by shooters worldwide
who demand the best.
Eliminator’s proprietary formulation is a combination of
ingredients that can simultaneously cut through heavy layers of carbon and
copper fouling that accumulate during shooting.
Eliminator begins its assault on fouling by utilizing a
strategic blend of chemical surfactants that quickly loosen and release carbon
deposits from the barrel’s surface. These surfactants also effectively
neutralize all corrosive residues preventing barrel damaging rust and
corrosion.
During the removal of carbon fouling, Eliminator also uses
an unparalleled process that rapidly oxidizes copper fouling and suspends it in
the cleaning solution, rendering it unable to redeposit onto the barrel
surface. This exclusive technology allows for the continued and complete
extraction of both carbon and copper fouling at full strength without becoming
saturated and losing effectiveness.
Bore Tech Eliminator is 100% ammonia free and barrel safe.
It will not etch or harm barrel steels and can be safely left to soak in the
bore for an infinite period of time. In addition, the Eliminator also contains
a short term rust preventative, which shields and conditions the firearm’s bore
after cleaning. Just dampen your last patch with Eliminator and your bore will
be protected against rust and corrosion for up to 2 weeks.
Bore Tech Eliminator is the premier, state of the art bore
cleaner that quickly eliminates carbon and copper fouling without the hazards,
toxicity, and odors found in competitive cleaners. Rapidly remove fouling from
your bore and all the other cleaners from your bench… Bore Tech Eliminator Bore
Cleaner.
Are your firearms Bore Tech Eliminator Clean?
Bore Tech - Redefining Gun Care
Proudly made in the USA
Eliminator™ Bore Cleaner has all of the most important
features that any gun cleaning solvent should have.
Important Gun Cleaning Solvent Features Include:
100% Barrel Safe
Odor Free
100% Biodegradable
Contains No Ammonia
Acts As A Short-Term Rust Preventative
Non-Flammable
Made in the USA
Packaged In A Treated HDPE Plastic Bottle for longer storage
Twist Open/Close Dispensing Cap w/ foam gasket seal
Bore Tech Eliminator™ Bore Cleaner Use Instructions
UNLOAD FIREARM
1) Wet 3 to 4 Bore Tech X Count patches with Eliminator Bore
Cleaner and individually push through bore to remove loose fouling. Only push
patches through the bore in ONE direction.
2) Next, make 10 to 15 passes with a tight fitting Bore Tech
Proof-Positive Nylon brush saturated with Eliminator.
3) Then repeat Step 1 and let Eliminator soak for 3 to 5
minutes. For badly fouled rifles, extended soak times may be needed.
4) Finally, push dry patches through the bore until they
come out clean.
5) Repeat above steps if necessary.
6) Before storing firearm, dampen a patch with Eliminator
and push through bore. This will protect against rust/corrosion for up to 2
weeks under normal storage conditions.
7) For extended storage or in adverse conditions apply Bore
Tech Friction Guard XP Gun Oil.
8) Before using firearm, always run a dry patch through the
bore. This will remove any residue and ensure against obstructions.
FAQ
Q: What is the difference between Eliminator, Cu+2 Copper
Remover and C4 Carbon Remover?
A: The Eliminator removes both carbon and copper fouling and
is recommended for most regular fouling situations. It provides a quick, easy
and great overall clean. For extreme fouling situations the specific Cu+2
Copper Remover (Copper Removal Only) and C4 Carbon Remover (Carbon Removal
Only) are recommended. These solutions directly target and effectively focus on
removing their respective fouling types. Please see our Chemical Selection
Guide located in the Specification Tab or in our Knowledge Center for more
information.
Q: Is Eliminator safe to leave soak in a barrel overnight?
A: Yes, the Eliminator can be left to safely soak in barrels
for an infinite time period.
Q: Does Eliminator contain ammonia or any other barrel
damaging components?
A: No, the Eliminator Bore Cleaner is 100% barrel safe.
Q: Is the Eliminator safe for use on chrome lined barrels?
A: Yes, the Eliminator can be safely used on chrome lined
barrels, chromoly steel barrels, stainless steel barrels and any other commonly
used barrel steel.
Q: Is the Eliminator safe if it gets on my rifle stock?
A: The Eliminator is safe on all polymer, fiberglass,
laminated or polyurethaned wood. However, if the Eliminator comes in contact
with an oiled wooden stock, it might cause a blemish by removing the oil and
require reapplication of sealing oil.
Q: Can Eliminator be used on the outside of my rifle barrel?
A: Yes, the Eliminator can be safely used on the outside of
a rifle barrel to remove copper fouling. Once finished cleaning be sure to wipe
the cleaned area dry and apply Bore Tech Shield XP Rust Preventative.
Q: Can Eliminator be used on nickel plating?
A: Yes, the Eliminator can be used on nickel plating but
cannot be left in contact for more than 3-5 minutes. Extended contact can lead
to darkening or discoloration of the plating. Do not use on plating that has
been damaged or worn.
Q: Can Eliminator be used as a lubricant?
A: No, the Eliminator Bore Cleaner is a cleaner not a
lubricant. Use Bore Tech Friction Guard XP Gun Oil for superior lubrication.
